Sutron Corporation 8310 & 7310 Users Manual
8800-1125Rev. 2.7 (BETA)
12/23/2014
pg.
9
Operation with Xpert- NIFC
option (-2 model)
When using the NIFC version (-2) the modem becomes an interface between an Xpert and a radio. It allows an
operator to remotely "wake up" an Xpert Station with a remote Radio with DTMF keypad. The operator enters
the unique station id of interest, and then listens to a pre-programmed set of sensor values. The modem
decodes the DTMF tones and provides the speech playback capabilities for the Xpert Station.
With this option, the modem DOES NOT operate as a normal phone line modem and SHOULD NOT be connected
to a phone line.
The validation of the Station ID and the configuration of the sensors to read back are all handled by the Xpert
application software. Refer to the appropriate Xpert or 9210 Users manual for detailed set-up instructions.
The modem jumpers should be set to connect to an Xpert (see jumper table above) to operate with the Xpert
and BK radio.
Connection to BK Radio
The 8080-0005-2 can be connected to a BK radio. A drawing of the RJ11 connector on the modem and the
connections to the radio are shown below:
