Models W542, W552 & W554
BOX CONTENTS:
• Towel Warmer
• (12) screws
• (2) Upper threaded flanges
• (1) Lower Bracket
• (1) Lower bracket screw
• (1) Wiring flange
• (1) Small allen key
• (1) Large allen key
• Instruction & Operation Manual
• Warranty
1. Remove WarmaTowel and parts from the
packing materials
2. Rotate two upper brackets as shown
3. Spin on upper two threaded flanges as shown
4. Assemble lower bracket as shown
5. Using the smaller allen key provided, loosen
the wiring box set screw. DO NOT remove the
wiring box.
6. Rotate the wiring box as shown. Tighten the
set screw firmly to prevent the wiring box
from rotating.
NOTE: The wiring box and upper brackets on
model W542 can be rotated in either
direction to result in a right or left handed
wiring box.
7. Place the towel warmer in the desired
location. Use a level to insure proper
alignment. Mark the location of the wiring
box.
If a single gang electric box has
been roughed-in, see page 2
for instructions
3
Upper Brackets
Upper Threaded
Flanges
Wiring Box
Set Screws
Wiring
Box
Lower
Bracket
Level
Wiring
Box
WARNING
!
WarmaTowel
Installation and Operating Instruction
®
