Mr
S
team CU Series
Installation, Operating & Maintenance Manual
Control Circuit Wiring Diagram
9
SEE PGS. 10 & 11 FOR DIAGRAMS
NOTES:
1.
Larger rooms may require two or more steam solenoid valves in parallel.
2.
When generator services two rooms, second room requires a set of F1 Plus solenoid valves and CU-HL.
IMPORTANT:
3.
F1
Plus sensors are intended to be field installed within the steam room at the location selected by the
designer/architect.
4.
Autoflush System 24 hr. timer and F1 Plus operating settings are at the discretion of the owner/operator.
IMPORTANT:
Owners/operators should obtain a copy and familiarize themselves with the latest edition of the American College Sports
Medicine Health/Fitness Faculty Standards and Guidelines, or a similar resource and reference publication, and refer to
those quide lines for the proper and safe operation of a spa facility including steamrooms. Steam room construction infor-
mation is available from the Tile Council of America, Inc. at (864) 646-8453 or www.tileusa.com.
The
F1
Plus Temperature Control System is required operating equipment for each steam room.
The operating temperature control is to be set by the owner/operator to sense desired room tempera-
ture at the sensor location within the steam room. Installation of the
F1
Plus System high limit room tem-
perature sensor and control is mandatory to provide additional protection to the bathers.The steam
room is to be operated in accordance with “Important” information as noted above.
IMPORTANT:
Final selection of the steam room temperature setting is at the decision of the owner/operator.
!
CAUTION
