Identification and notes
VariFrame – Assembly Instructions
page 7
2
Identification and notes
2.1
Designation
VariFrame
Consisting of:
Cross beam VariFrame
Fixing plate
Foot base-Q or Foot base-RE
VariFrame installation kit
2.2
Manufacturer
SUSPA GmbH
Mühlweg 33
90518 Altdorf
GERMANY
2.3
Intended use
The table frame serves as connecting element between a countertop and two lifting columns (ELS3)
for seated or standing workstations in the office. Therefore, the foot base are attached to the lifting
columns. These must then be attached to the upper frame sections. The preassembled table base
frame is joined with the tabletop. The system is only designed for load that applies pressure.
IMPORTANT
Prior to installation or commissioning, ensure that the appropriate table frame has
been selected. Please note in this regard the technical specifications (see section 4.1 Technical
specifications), in particular, the maximum load and adjustment range information.
Any other or advanced use of the table frame is deemed not to be in the manner intended and thus
improper.
This partly completed machinery is intended to be incorporated into other machinery, other partly
completed machinery/equipment or to be joined with another framework so as to form a complete
machine as specified under the Machinery Directive. The machine should be put into operation only
