Installation
VariFrame – Assembly Instructions
page 23
5.3.2.3
Positioning the cross beams – tabletop size: 1400 mm to 2000 mm x 800 mm
Place two cross beams each (pos. A) to the right and left of the lifting columns.
The lifting columns and cross beams must be aligned with each other. The boreholes
for the cross beam match the boreholes for the lifting columns.
The cross beams should overlap as much as possible. In proper position, each pair of
cross beams can be screwed together at four places respectively.
Figure 13 Positioning the cross beam (pos. A)
