background image

14

GENERAL SAFETY RULES

 WARNING: RISK OF EXPLOSION OR FIRE.

• Fuel and its vapors are extremely flammable 
and explosive. Fire or explosion can cause se-
vere burns or death.
· ALWAYS shut off engine and allow it to cool a 
least 2 minutes before adding fuel to the tank.
· ALWAYS use care in filling tank to avoid spill-
ing fuel. Move pressure washer away from fu-
eling area before starting engine.
· ALWAYS Keep maximum fuel level below top 
of tank to allow for expansion.
· ALWAYS operate and fuel equipment in well 
ventilated areas free from obstructions. Equip 
areas with fire extinguishers suitable for gaso-
line fires.
· NEVER operate pressure washer in an area 
containing dry brush or weeds.
· ALWAYS keep pressure washer a minimum of 
four feet away from surfaces (such as houses, 
automobiles, or live plants) that could be dam-
aged from muffler exhaust heat.
· ALWAYS Store fuel in an OSHA approved con-
tainer, in a secure location away from work 
area.
· NEVER spray flammable liquids.

 DANGER: CARBON MONOXIDE HAZARD.

• Running engine gives off carbon monoxide, 
an odorless, colorless, poison gas. Breathing 
carbon monoxide can cause nausea, fainting 
or death. Some chemicals or detergents may 
be harmful if inhaled or ingested, causing se-
vere nausea, fainting or poisoning.
· ALWAYS Operate pressure washer in a well 
ventilated area. Avoid enclosed areas such as 
garages, basements ,etc.
· ALWAYS Keep exhaust gas from entering a 
confined area through windows, doors, venti-
lation intakes, or other openings.
· NEVER operate unit in a location occupied by 
humans or animals.
· ALWAYS use the only fluids specifically recom-
mended for high pressure washers.
· ALWAYS follow manufacturers recommenda-
tions, use a respirator or mask whenever there 
is a chance that vapors may be inhaled.
· NEVER use chlorine bleach or any other cor-
rosive compound.

 WARNING: RISK OF FALL HAZARD.

• Use of pressure washer can create puddles 
and slippery surfaces.
 Kickback from spray gun 
can cause you to fall.
· Keep operating area clear of all persons, pets, 
and obstacles.
· Do not operate the product when fatigued or 
under the influence of alcohol or drugs. Stay 
alert at all times.
· Never defeat the safety features of this product.
· Do not operate machine with missing, bro-
ken, or unauthorized parts.
· Never leave wand unattended while unit is 
running.
· If engine does not start after two pulls, 
squeeze trigger of gun to relieve pump pres-
sure. Pull starter cord slowly until resistance is 
felt. Then pull cord rapidly to avoid kickback 
and prevent hand or arm injury.
· Keep children away from the pressure washer 
at all times.
· Do not overreach or stand on an unstable support.
· The cleaning area should have adequate 
slopes and drainage to reduce the possibility 
of a fall due to slippery surfaces.
· Be extremely careful if you must use the pres-
sure washer from a ladder, scaffolding, or any 
other similar location.
· Firmly grasp spray gun with both hands when 
using high pressure spray to avoid injury when 
spray gun kicks back.

 WARNING: RISK OF ELECTRICAL SHOCK. 

• Risk of electrocution. Contact with power 
source can cause electric shock or burn.
· Unplug any electrically operated product be-
fore attempting to clean it. Direct spray away 
from electric outlets and switches.
· NEVER spray near power source.

 WARNING: RISK TO FLUID INJECTION.

• The high pressure stream of water that this 
equipment produces can cut through skin and 
its underlying tissues, leading to serious injury 
and possible amputation. Spray gun traps high 
water pressure, even when engine is stopped 
and water is disconnected, which can cause 
injury.
· ALWAYS point spray gun in safe direction and 
squeeze trigger, to release high pressure, every 
time you stop engine.

HG526 manual.indd   14

22/01/16   11:11 a.m.

Summary of Contents for HG526

























Reviews: