09
INSTALLATION
1.
Power supply condition: Use only a 120-volt outlet with grounding wire receptacle.
2. Operationa
l conditions: Temperature: 0
℃
~
40
℃
; Relative humidity: <75%.
3.
The unit should be installed in an indoor area
.
Prior to using unit for the first time, you must remove the plastic bag from the
HEPA-
Rx
filter inside the unit.
1. Turn unit upside down - put towel or any soft pad on the ground to avoid damage to the unit when you
turn it upside down.
2. Open unit from the bottom - turn counterclockwise to open bottom as pictured below
(Pic.1)
.
3. After the bottom plate is removed, pull out the power cord of the UV
-C+
lamp, open the unit lock (Pic.
2) and
take out the HEPA
-Rx
filter and the Activated carbon filter to remove the plastic cover.
5. Put the HEPA
-Rx
filter and Activated carbon filter back into unit. Align the blue arrow with blue arrow, turn
the
unit lock clockwise until the blue arrow is aligned with the letter C on the bottom plate
(Pic.
2)
6. Re-connect the UV
-C+
power cord, install the unit bottom by rotating clockwise the same with the Step
5 ( Pic.1)
Before operation
1
2
CLOSE
CLOSE
OPEN
OPEN
B
E
S
U
R
E
T
O
U
N
P
LU
G
THE
POWER
C
O
R
D
B
E
S
U
R
E
T
O
U
N
P
LU
G T
HE
P
OW
ER
C
O
R
D
CLOSE
OPEN
OPEN
.
.