10
OPERATION 1
1 2 3
Plug the power cord in and you will hear a “Beep”. The small, inner circle will turn blue - this indicates the air
purifier is in
standby mode.
Use your hand to wave over the sensor, this waving motion turns the unit on & off,
and can also adjust the fan speed.
(Wave 1)
Wave your hand the 1
st
time and the blue circle will turn white-
low speed.
(Wave 2)
Wave a 2nd time, the second circle will light up - medium
speed.
(Wave 3)
Wave a 3rd time, the third circle will light up - high speed.
(Wave 4)
Wave a 4th time, all the circles light up white - turbo speed.
(Wave 5)
Wave a 5th time, the “AUTO” indicator will light up.
This is
Auto Mode
-the unit will operate on low speed and will adjust
speeds accordingly
based on what pollution the sensors pick u
p
in the air
(See below pic.).
(Wave 6)
Wave 6th time, the unit goes back to
S
tandby Mode
and the
inner circle turns back to blue.
Hover & hold your hand over the sensor for 2 seconds and this will lock the
unit at the desired speed. This will prevent accidental or unwanted speed changes.
To unlock this feature, hover & hold your hand over the sensor again for 2 seconds.
Indicator Color
Blue
Orange
Red
PM2.5
≤35μg/m³
36~150μg/m³
>150μg/m³
TVOC Level
Speed
L
M
H
~
~