26
4.7 STORAGE
After the season's use or when the machine will not
be used for a period of time, completely inspect all
major systems of the Chipper-Shredder. Replace or
repair any worn or damaged components to prevent
any unnecessary down time at the beginning of the
next season.
Follow this procedure before storing:
1. Remove all material from the machine.
2. Wash and store in a dry, secure location.
3. Thoroughly wash the machine with a pressure
washer or water hose to remove all dirt, mud
or debris.
4. Lubricate all grease points to remove any water
residue from washing.
5. Inspect all rotating parts for entangled material.
Remove all entangled material.
6. Run the machine a few minutes to dry the mois-
ture from inside the machine.
7. Discharge fuel to prevent gum in the fuel system
and carburetor parts. Review the engine owners
manual for the proper proceedure.
8. Touch up all paint nicks and scratches to prevent
rusting.
9. It is best to store the machine inside. If that is
not possible, cover with a waterproof tarpaulin
and tie down securely.
10. Store in an area away from human activity.
11. Do not allow children to play around the stored
unit.
4.7.1 PLACING IN STORAGE
4.7.2 REMOVING FROM STORAGE
When removing this machine from storage, follow
this procedure:
1. Remove the tarpaulin if covered.
2. Review and follow the pre-operation checklist.
OPERATING SAFETY
• Store the unit in an area away from human
activity.
• Do not permit children to play on or around
the stored machine.
• Store the unit in a dry, level area. Support the
frame with planks if required.
Fig. 13 STORED
SM32S
