25
9. Unplugging:
Although the machine is designed to handle a
wide variety of material without any problem,
occasionally it plugs. When the machine plugs,
follow this procedure to clear it:
a. Clear the area of bystanders, especially
small children.
b. Follow the stopping procedure and wait for
all moving parts to stop before unplugging.
c. Pull the material out of the chipper and
shredder feed hoppers. Be sure all the
material is out and nothing is jammed or
wedged between the input opening and
the rotor.
d. Carefully tilt the chipper back and remove
all the material from the screen. Remove
material from every hole.
f.
Severe plug:
• Follow the stopping procedure and
wait for all moving parts to stop before
proceeding.
• Remove the 2 upper rotor housing bolts
and carefully open the housing.
• Remove material from inside the rotor
compartment.
• Clean out the discharge area/rotor and
screen.
• Be sure to turn the rotor by hand to be
sure there is nothing jammed between
the rotor and stationary blades.
• Close and secure rotor cover. Tighten
fasteners to their specified torque.
g. Check that everyone is clear of machine
before restarting engine.
h. Start the engine, engage the drive system
and resume working.
Fig. 12 UNPLUGING
10
.
Cleaning:
Clean the machine frequently to prevent a build-
up of dust, chips and trash on the frame. A clean
machine reduces the chance of fire or rusting.
Machine is shown with guard or rotor cover
opened for illustrative purposes only. Do not
operate machine with guard or cover opened
Shredder Hopper
Chipper Hopper
Discharge Cage
& Screen SM32S
Rotor & Housing
