Surge master SE80CR Operator'S Manual Download Page 8

8

SAFETY 

YOU

 are responsible for the SAFE operation and 

maintenance of your SurgeMaster Trailer Wood 

Splitter.  

YOU

 must ensure that you and anyone 

else who is going to use, maintain or work around 

the Trailer Wood Splitter be familiar with the use 

and maintenance procedures and related 

SAFE-

TY

 information contained in this manual.  This 

manual will take you step-by-step through your 

working day and alerts you to all good safety prac-

tices that should be used while using the Trailer 

Wood Splitter.

Remember, 

YOU

 are the key to safety. Good 

safety practices not only protect you but also the 

people around you.  Make these practices a work-

ing part of your safety program.  Be certain that 

EVERYONE

 using this equipment is familiar with 

the recommended use and maintenance proce-

dures and follows all the safety precautions. Most 

accidents can be prevented.  Do not risk injury or 

death by ignoring good safety practices. 

2.1  SAFETY DO'S & DON'TS'

•  DO

 give operating instructions to operators or 

employees before allowing them to operate 

the machine, and REVIEW annually thereaf-

ter.

•  DO

 read and understand ALL Safety and Op-

erating instructions in the manual and follow 

them. Most accidents can be 

avoided. The most important 

safety device on this equip-

ment is a SAFE operator.  

•  DO NOT 

expect a person who has not read 

and understood all use and safety instructions 

to operate the machine.  An untrained opera-

tor is not qualified and exposes himself and 

bystanders to possible serious injury or death. 

It is the owners responsibility to the operator 

to ensure familiarity and understanding of the 

machine.

•  DO NOT

 modify the equipment in any way. 

Unauthorized modification may impair the 

function and/or safety and could affect the life 

of the equipment.

•  DO NOT

 allow riders while towing the ma-

chine.

•  DO NOT

 risk injury or death by ignoring good 

safety practices. 

•  DO

 review safety related items annually with 

all personnel who will operating or maintaining 

the Trailer Wood Splitter.

•  DO

 have a first-aid kit available for use should 

the need arise and know how 

to use it. 

•  DO

 read and understand all 

safety signs located on the 

machine before using, main-

taining, adjusting or cleaning the Trailer Wood 

Splitter.

•  DO

 have a fire extinguisher available 

for use should the need arise and 

know how to use it.

•  DO

 inspect and secure all guards 

before starting.

•  DO

 wear appropriate protective gear.  This list 

includes but is not limited to:

• A hard hat

•  Heavy  gloves

• Wet weather 

gear

• Hearing Protec-

tion

• Respirator or 

filter mask

• Protective shoes  with slip resistant soles

• Protective glasses, goggles or face shield

•  DO

 wear suitable ear protec-

tion for prolonged exposure to 

excessive noise.

•  DO

 prepare before servicing, 

adjusting, repairing or unplug-

ging: 

• stop the machine, 

• shut off the engine, 

• remove ignition key and place in your 

pocket, 

• wait for all moving parts to stop 

• clear the area of people, especially small 

children.

• set tow vehicle brake

•  DO 

check splitting bed, air vents, intakes and 

exhausts, that they are clear of debris prior to 

starting the machine

•  DO NOT

 touch hot engine parts, muffler, muf

-

fler cover, engine body,  engine oil, etc. during 

operation and after the engine has been shut 

off. Contact may cause burns.

•  DO NOT

 modify, disable or change in any way 

the safety controls. 

•  DO

 think SAFETY! Work SAFELY!

Summary of Contents for SE80CR











































Reviews: