SurfLink MINI MOBILE, Operation Manual

Page: 26 / 48

Operation
Low Battery and Charging
If SurfLink Mini Mobile Adapter is on and enters a low
battery condition, the LED slowly pulses red until it
automatically shuts down, or until a power source is
applied. When the Mini Mobile Adapter is attached
to a power source, the LED becomes solid green and
charging automatically begins. When power is on,
the solid green LED will be interrupted by other LED
behaviors. When the battery is fully-charged, the solid
green LED turns off.
Typical Charging Method
To charge the battery, attach
the microUSB end of the
charging cable to the female
microUSB jack on SurfLink Mini
Mobile Adapter. Attach the
USB end of the charging cable
to a female USB jack, such as found on a plugged-in
wall power adapter, car charger adapter, or computer.
You can charge both SurfLink
Mini Mobile Adapter and
SurfLink Remote Microphone
at the same time while they
are attached. While charging,
you can stream audio for
26
Operation