1. Remove the strap from the canopy.
2. Gently spread the canopy arms open
with your hands
(refer Figure A).
3. Ensure the slider knob is loose
and slider can move freely
(refer
Figure B). Insert the winder handle (30)
into the winder housing (31) on the mast
and roate in a clockwise direction.
4. Continue winding until the canopy is
fully open. (The bottom hub (6) will be
seated into the hub tube (9) and the
edge of the canopy should be tight
(refer Figure C).
Note: The winder handle will become a
little harder to wind as the parasol
nears fully open. This is normal
particularly when the canopy is new.
5. Once the canopy is fully opened, hold
the slider knob (20) and push the
slider up until the canopy is
horizontal and slider is at its highest
position. Tighten slider knob (20)
clockwise to secure the parasol.
6. The winder handle may be removed if
desired.
Gently spread the canopy arms open
Figure A
Ensure tilt knob is loose (turn anti-clockwise)
when opening and closing parasol
Figure B
Edge of canopy should be tight
Figure C
TO OPEN PARASOL
