4. Attach the remaining arm to the other
side.
NOTE: There is adjustment to the
outer end of the stays so as to align
the knob/screw connection with the
parasol arm ends.
5. You may need to loosen the central
threaded stainless screw and adjust
up or down the mast until you have
applied a little upward tension on the
parasol arms. Tighten this screw in
position
(refer Figure E for parasol).
CAUTION: Do not over tension as this
may disort the parasol arms.
Reverse the process to remove.
This must be removed to close the
parasol or tilt the canopy.
IMPORTANT: Your Amalfi parasol, even when
fitted with the stabilising bars is not a
permanent, all-weather structure. The parasol
should be closed and folded when not in use
and never left open when unattended or in
strong winds.
Parasol with stays attached
Figure E
Set T-lock to horizontal
Figure D
Parasol with stays attached
Figure E
TO USE (OPTIONAL) STABILISER BARS
