18
Copyright 2020 Lippert Components, Inc. dba SureShade®
MTX Installation Guide MTX3-INST-0317002-ENG
CAUTION
Use care when tightening mounting clamp bolts. Do
not overtighten to the point where the surface material
starts to buckle.
i. Line up and install the four mounting clamps to the hardtop. We
recommend using 5/16
– 18 bolts and tighten down with nuts.
Step 3.
Installing the actuators.
a. Place actuators onto installed mounting clamps.
b. Install top mounting clamps with included bolts. Ensure bolts are snug, do
not over tighten. (See Figure 9.)
Figure 9: Install Actuator and Top Mounting Clamps
