16
Copyright 2020 Lippert Components, Inc. dba SureShade®
MTX Installation Guide MTX3-INST-0317002-ENG
ii. For bottom mount with a curvature, mounting clamps will be
mounted to the outside of the actuator centerline and will need to
be drilled at an angle. (Depicted by the green centerlines). (See
Figure 7c.)
Figure 7c.: Underside Mount Curved
NOTICE
NOTICE
If mounting on a curvature, mark one clamp and measure from the
clamp centerline to the actuator centerline. Use that measurement
to aid in placement of the remaining clamps.
f. Mark the location of the mounting clamps using a grease pencil.
g. Carefully remove actuator from mounting clamps. Ensure mounting
clamps are in marked location and mark holes for drilling. (See Figure 8a
and 8b.)
