SureShade 2020134625 Installation And Owner'S Manual Download Page 2

2

lci1.com      

 

574-537-8900    

 

Rev: 01.05.21

SureShade

®

 

Power Bimini  

Sport Arm Kit

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0003954

Introduction

The installation of LCI SureShade

®

 front sport arms to 

the Bimini frame adds structural strength to the overall 

SureShade Awning assembly during boating at moderate 

speeds, in gusty winds and inclement weather. LCI 

SureShade front sport arms are easy to install, easy to 

deploy and store away neatly and securely when not 

in use.
For information on the assembly or individual components 

of this product, please visit:

https://support.lci1.com/sureshade-power-bimini

NOTE: 

Images used in this document are for reference 

only when assembling, installing and/or operating this 

product. Actual appearance of provided and/or purchased 

parts and assemblies may differ.
Additional information about this product can be obtained 

fro

lci1.com/support

 or by using the myLCI app. 

Replacement kits can be ordered from 

https://store.lci1.

com/

 or by using the myLCI app.

The myLCI app is available for free on iTunes

®

 for iPhone

®

 

and iPad

®

 and also on Google Play

 for Android

 users.

iTunes

®

, iPhone

®

, and iPad

®

 are registered trademarks of 

Apple Inc.
Google Play

 and Android

 are trademarks of Google Inc.

Safety

Read and fully understand all instructions before installing 

or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables 

can change the circumstances of the instructions, i.e., 

the degree of difficulty, operation and ability of the 

individual performing the instructions. This manual 

cannot begin to plot out instructions for every possibility, 

but provides the general instructions, as necessary, for 

effectively interfacing with the device, product or system. 

Failure to correctly follow the provided instructions may 

result in death, serious personal injury, severe product 

and/or property damage, including voiding of the LCI 

limited warranty.

THE “WARNING” SYMBOL ABOVE IS A SIGN THAT 

A PROCEDURE HAS A SAFETY RISK INVOLVED 

AND MAY CAUSE DEATH OR SERIOUS PERSONAL 

INJURY IF NOT PERFORMED SAFELY AND WITHIN 

THE PARAMETERS SET FORTH IN THIS MANUAL. 

FAILURE TO FOLLOW INSTRUCTIONS PROVIDED 

IN THIS MANUAL MAY RESULT IN DEATH, SERIOUS 

PERSONAL INJURY AND/OR SEVERE PRODUCT AND 

PROPERTY DAMAGE, INCLUDING VOIDING OF THE 

COMPONENT WARRANTY.

DO NOT REMOVE THE BOOT WITH THE BIMINI 

FRAME IN RADAR POSITION. REAR FRAME CAN 

FALL CAUSING SERIOUS PERSONAL INJURY OR 

DAMAGE TO THE BOAT.

•  NEVER ATTEMPT TO OPERATE THE TOP WHILE 

THE BOAT IS IN MOTION.

•  NEVER EXCEED 25 MPH WITHOUT THE BOOT 

PROPERLY INSTALLED.

•  NEVER OPEN THE TOP IN EXCESSIVELY HIGH 

WINDS, WHICH COULD RESULT IN SERIOUS 

PERSONAL INJURY, SEVERE PRODUCT AND/OR 

PROPERTY DAMAGE.

•  NEVER TRAILER/TOW THE BOAT WITHOUT 

THE BOOT ON AND THE TOP IN THE FULL 

DOWN POSITION.

•  NEVER OPEN THE TOP WITHOUT THE 

CANVAS INSTALLED.

Summary of Contents for 2020134625













Reviews: