15
Radio Collar Receiver
Illustrated Features
Collar Fabric
Collar Receiver
Correction Probes
Charging Port
Correction Control
Status Light
Distance Control
Correction Control
OFF
is the position you should select when the
collar is not in use. Rotate the Correction Control
knob slightly clockwise to switch the collar ON.
AUTO
position will automatically increase the
correction based on your dog
’s recent
history of
attempted escapes. This takes the guess work out
of selecting a manual correction setting. After you switch the device ON, AUTO starts at the
lowest correction level #1. The level increases after each attempted escape. Once your dog
stops trying to escape, the correction level will automatically reduce over a few weeks. To
select a manual correction level, continue to rotate clockwise.
MAX
is the maximum
correction level. There are 10 levels of correction, but the intensity of MAX is about 30
times that of level 1. Level 1 is low and designed for sensitive dogs. MAX is high and
designed for stubborn dogs.
In TRAIN
position the correction is switched off. Use this for: 1/ Initial training (described
later). 2/ Whenever you adjust or test the Activation Distance.
Distance Control
The Activation Distance is the distance between the Boundary Wire and the maximum
distance at which the collar starts to sound its warning.
MIN
is less than 1m.
MAX
can be
4m or more. Each collar may be set to
its own distance according to your dog’s behaviour
or the type of boundary you have. (See Guidelines below). For best results we recommend
a greater distance during the first week or so which can be reduced once reliable
containment is achieved.
