3.6 Configuring your PCs to Connect to the Router
Before you start to configure other PCs to accept the IP address that your Router will
provide, make sure the network card or adapter has been successfully installed into
each PC you planed to connect to the Router. Complete the following steps to
configure your PC:
Step 1
Click the
Start
button, select
Setting
, then
Control Panel.
Step 2
Double Click the
Network and Dial-up
icon.
Step 3
Highlight the Local Area Connection and click the button of Properties.
Step 4
In the Configuration window, select the
TCP/IP protocol line
that has been
associated with your network card or adapter. (See Figure 3-34)
Figure 3-34
Network Box Screen
42
Summary of Contents for 4504AX
Page 1: ...Cable DSL Gateway Router plus 4 port Switch User Guide Version 1 0 1...
Page 16: ...Figure 3 5 Cable DSL Setup Menu with No Option Screen Figure 3 6 PPPoE Menu Screen 16...
Page 36: ...Figure 3 29 Virtual Server Setting Menu Screen With WAN Address 36...
Page 38: ...Figure 3 30 Static Routing and Dynamic Routing Menu Screen 38...
