SureCall Fusion2Go OTR
www.SureCall.com | 1-888-365-6283 | [email protected]
9
Specifications
Product
Fusion2Go OTR
Uplink Frequency Range (MHz):
698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755
Downlink Frequency Range (MHz):
728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155
Supported Standards:
CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
Maximum Gain:
50 dB
Input / Output Impedance:
50 Ω
Gain Adjustment:
20 dB (Automatic)
Maximum Uplink Power
29.0 dBm
Noise Figure:
≤ 5 dB
VWSR:
≤ 2.0
Maximum Output Power:
1 Watt EIRP
Cable:
SC-174 / RG-58U
RF Connectors:
FME Male (both ends)
Power Consumption:
≤ 10W
Operation Temperature:
-4º to +158º F
Dimensions:
5.625 x 4 x 1.125 inches
Weight:
1.43 lbs
Certification:
FCC ID: RSNF2GO3 (Fusion2Go 3.0)
IC: 7784A-F2GO3 (Fusion2Go 3.0 v2)
Note: The term “IC” before the radio certification number only signifies that Industry Canada technical specifications
were met.
Troubleshooting
Problem
Resolution
Signal booster has
no power
1.
Verify that the Power LED is ON.
2.
Connect the power supply to an alternate power source.
3.
Verify that the power source is operational and the fuse is intact.
4.
If it remains OFF, contact tech support at:
1-888-365-6283 or [email protected]
After completing
installation, signal
has not Improved
Verify that cable connections are tightly fitted to the booster.
Try further separating the antennas.
Note:
Bars are not always a reliable measure of signal. The best way to confirm
signal coverage is the ability to place and hold a call.
