background image

 CHAPTER  1:       Introduction  1 

          

1.1 - Package Contents                                                                                    4

 

1.2 - Features & Benefits                                                                                  4 

             1.3 - Additional Items Needed                                                                          4 

 

1.4 - How It Works                                                                                            5

CHAPTER 2: Safety  

                                                                                                 5

 

2.1 - Safety Warnings                                                                                    5-6 

CHAPTER 3: Planning     

                                                                                           7                                                                        

 

3.1 - Overview                                                                                                  8 

 

3.2 - Exterior Antenna                                                                                       8

 

3.3 - Interior Antennas                                                                                       9 

 

3.4 - Antenna Separation                                                                          10-11

 

3.5 - BDA Location                                                                                         12 

 

3.6 - Accessories                                                                                           12 

 

3.7 - Need Help?                                                                                           12

CHAPTER 4: Installation

                                                                                          13 

 

4.1 - Selecting the Locations                                                                          13 

 

4.2 - Soft Installation                                                                                       13 

 

4.3 - Exterior Antenna                                                                               13-14             

             4.4 - Internal Antennas                                                                                    15 

 

4.5 - Mounting the BDA                                                                                 16

CHAPTER 5: Configuration & Testing    

                                                                17 

 

5.1 - DIP Switches and Lights                                                                  17-18 

             5.2 - Initial Configuration                                                                                 19

             5.3 - Powering on the BDA                                                                             19 

 

5.4 - Testing                                                                                                   19 

 

5.5 - Adjusting the BDA                                                                            19-20

            5.6 - Automatic Shutdown                                                                        20-21

CHAPTER 6: Warranty & Specifications                                                                

21

 

6.1 - Warranty Information                                                                               21 

 

6.2 - Specifications                                                                                        22

             6.3 - Contact Information                                                                                23

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]

3

Contents

Summary of Contents for Force3 PSB
























Reviews: