QUICK GRIT CHANGE SYSTEM
1
The
Surcare V4
has a Quick Grit Change System
(patent pending), which allows the operator to change
4 abrasive pads simultaneously. This can be achieved
in one of two ways:
1.
Removing the 4 abrasive discs from the pad
and replacing with another 4 discs of a
different grade grit onto the same clover
shaped disc pad.
2.
Removing the clover shaped disc pad that
contains the 4 abrasive discs and replacing it
with another clover shaped disc pad with the 4
abrasive discs of a different grade grit.
2
The
Surcare V4
is abrasive friendly and can take a
variety of brands of abrasive discs, which can be
purchased through your local suppliers or
Surcare
Australia.
The Quick Grit Change System operates on a Hook
and Loop System. If the user requires abrasives that
do not operate on a Hook and Loop System, interface
pads can be utilised between the pad and the
abrasive disc. Interface pads can be purchased from
abrasive suppliers.
3
Figure 1
shows the
SMF-Tetrad
resting on its side,
ready for the clover shaped accessory pad to be
removed and replaced with another. Note that the
machine rests on the rubber handle grip and the
rubber grommets around the fan cowl. Resting the
Tetrad
on its side in this way protects the capacitor
box and start and stop switches.
4
Figures 2 and 3
show removing the clover shaped
accessory pad from the mounting plate.
Figure 4
shows the mounting pad with accessory pad
completely removed.
Figure 5
shows replacing one accessory pad with
another.
5
NOTE: All Surcare machines feature Quick
Grit Change System however diagrams shown
portray Surcare SMF-TETRAD machine.
Principle of the Quick Grit Change System is
same for all machines
