SURCARE SMF-V4 SPECIFICATIONS
VOLTAGE
: 240V
WEIGHT
: 12kgs
HEIGHT
: 320mm (12.75 inches)
DISC SIZE
: 4 x 125mm (4 x 5”)
(13” OVERALL)
HORSEPOWER
: 0.375kw (½ HP)
REVS PER MINUTE
: 2800
ORBIT STROKE SIZE
: 6mm
(1/4
th
inch)
CENTRAL VAC READY
This machine has been designed for sanding and microfinishing and will give a
consistent surface finish.
The SMF-V4 may be used on almost any horizontal surface, providing the appropriate
abrasive discs are used for the particular surface to be sanded or microfinished. The
type of material being sanded and the finish required will determine which abrasive to
be used on the surface.
Be sure to have the appropriate abrasive discs attached and align pads in the correct
manner. Please discuss the abrasive requirements needed to sand and microfinish
that particular surface with your supplier.
If you have any other surface queries contact
SURCARE AUSTRALIA
.
Be sure to check all sanding accessories are properly adhered to the surface they
were designed to adhere to. When releasing discs from velcro mounts be careful not
to pull on the velcro mounts as this will cause dust to enter between the foam pad and
the mounts and deteriorate contact.
The SMF-V4 has been designed with a very efficient dust extraction system. This dust
extraction system enables material that has been removed by the SMF-V4 from the
surface being worked to be collected safely and disposed of appropriately. The
vacuum system also assists in keeping the work surface cool.
Vacuum system attachment for dust extraction should preferably be 1000 watts or
more.
