background image

Supreme

 Heating User Guide 

________________________________________________________________________________________________________________________________________________________________________________________________ 

21 

 

Warranty Agreement 

Definitions 

All capitalised expressions used in this warranty are defined in paragraph 17. 

 

Warranty 

Supreme Solar Pty Ltd warrants that its services in installing the Product will be carried out with 

due care and skill and subject to clauses 3, 4, 5 and 6, that the installed Product will be free from 

defects in workmanship for a period of twenty four (24) months after installation (warranty 

includes in field labour costs.) The warranty is given subject to the terms of this warranty 

agreement. 

 

The Solar Collector included in the Product carries: 

 

(a)  

in the case of a Strip Collector, a ten (10) year limited warranty from Procom Plastics 

Extrusions Pty Ltd, 38 McGregors Drive, Keilor Park, Victoria, 3042 (Phone: (03) 9331 7589, 

Email: 

[email protected]

); or  

 

 

(b)  

in the case of an Evacuated Tube Collector, a ten (10) year limited warranty from Supreme 

Solar Pty Ltd, 9 Lucknow Crescent, Thomastown, Victoria, 3074 (Phone: (03) 9460 4200, 

Email: 

[email protected]

); 

 

and is the only warranty given in respect of that part of the Product. 

 

The Automatic Controller included in the Product carries: 

 

(a) 

in the case of a SSV or Aqua-Gen 3 Series of Automatic Controllers, a three (3) year limited 

warranty (temperature sensors not covered) from Dontek Electronics Pty Ltd, 19 Melrich 

Road, Bayswater, Victoria, 3153 (Phone: (03) 9762 8800, Email: 

[email protected]

); or 

 

(b) 

in the case of a Aqua-Gen 2 Automatic Controller, a two (2) year limited warranty 

(temperature sensors not covered) from Dontek Electronics Pty Ltd, 19 Melrich Road, 

Bayswater, Victoria, 3153 (Phone: (03) 9762 8800, Email: 

[email protected]

); 

 

 

and is the only warranty given in respect of that part of the Product. 

 

The Solar Pump included in the Product carries a three (3) year limited warranty (six (6) months 

for commercial installations) from Astral Pool Australia Pty Ltd, 48 Hanna Street, Noble Park, 

Victoria, 3174 (Phone: (03) 9554 2200, Email: 

[email protected]

) and is the only 

warranty given in respect of that part of the Product. 

Summary of Contents for Heatseeker Solar Pool Heating

























Reviews: