SUPREME GALAXY, Owner'S Manual, Page: 21 / 25

GALAXY SUPREME FIREPLACES
21
Figure 27
– Hot Air System Knockout
Figure 28
– Hot Air System

Make a 4 ½ in. hole in the outside wall at the chosen location.

Install the air register.

Remove the flange from the side of the fireplace (see figure 26).

Insert the fresh air adaptor GY2330 (see figure 26).

Secure the fresh air adaptor to the side of the fireplace using sheet metal screws.

Install the air duct and secure it with duct clamps.
5.2 Hot Air System
The air duct system is an optional kit intended to bring warm air to remote area of the same room or to rooms other than
the room where the fireplace is installed. It is possible to install up to three air ducts.
Note that the hot air duct must be insulated and approved for temperatures of at least 210 °F.
WARNINGS:
1. The blower must not be installed in the fireplace casing.
2. When the hot air duct passes through the chase of the fireplace, the minimum distances to combustible materials must be
respected. The duct must be secured to prevent accidental displacement.
3. The minimum distance between the blower and the fireplace is 3 feet.
4. Do not use a speed control for the blower.
Installation
To install the hot air system:
2.
Knock on a knockout of the fireplace to clear an opening (Figure 9)
3. Install the fireplace duct connector item #5 on the side of the fireplace. Secure with
four screws.
4. Choose the room in which the hot air is desired to flow through. Cut an opening of 6
in. x 7.5 in.
5. Find a suitable location to install the blower (item #2).
6. Install the wall-duct connector (item #7).
7. Install the air duct and secure it with a clamp (item #4).
8. Install the wall grill (item #6).
9. Make the electrical connections (Figure 11). The electric power must be 115
volts.
CAUTION: Only remove the knockouts where the air duct will be installed.
Removing a knockout without installing an air duct could compromise the
safety of your fireplace.
WARNING: If the grill is installed near a wall, the grill openings must be positioned in such a way to
d irect hot air
away from the wall.
Knockout