background image

24 

 
 

7  WARRANTY 

SUPREME  FIREPLACES  INC.  warrants  that  the  factory-built  fireplaces,  fireplace  inserts,  and  stoves  will  be 
free from defects in material and workmanship, under normal use and service, for a period of 

twenty-five (25) 

years

 from the date of purchase. 

This  warranty  is  only  intended  for  the  original  retail  purchaser,  given  that  the  product  was  purchased  from 
SUPREME  FIREPLACES  INC.  or  one  of  its  authorized  dealers.  This  warranty  is  conditional  upon  correct 
installation and intended use of the products and does not cover damages caused by misuse. This warranty 
shall be void if the fireplace and stove is not installed by an authorized qualified technician in accordance with 
the  installation  instructions  in  the  manual  provided  with  this  product.  The  installation  must  meet  local  and 
national building codes. 

WARRANTY LIMITATIONS: 

Abuse and improper use of the unit may cause irreversible damage and will void the warranty. 

I. 

During  the  first  two  years  of  the  Limited  Warranty,  SUPREME  FIREPLACES  INC.  will  provide 
replacement parts at no charge and will also pay for reasonable labor costs, except for the parts listed 
in the EXCLUSIONS portion of this warranty. 

II. 

During  the  third  through  the  fifth  year  of  the  limited  warranty,  SUPREME  FIREPLACES  INC.  will 
provide  replacement  parts  (if  available)  at  no  charge,  except  for  the  parts  mentioned  in  the 
EXCLUSIONS portion of this warranty. Supreme Fireplaces Inc. shall not be responsible for any labor 
costs. 

III. 

From the sixth through the twenty-fifth year of the limited lifetime warranty, SUPREME FIREPLACES 
INC. will provide replacement parts (if available) at 50% of the retail price, except for the parts listed in 
the EXCLUSIONS portion of this warranty. SUPREME FIREPLACES INC. shall not be responsible for 
any labor costs.   

Transportation,  packaging,  and  other  related  costs  or  expenses  arising  from  the  replacement  or  repair  of 
defective  parts  will  not  be  covered  by  this  warranty,  nor  will  SUPREME  FIREPLACES  INC.  assume 
responsibility for them. 

EXCLUSIONS: 

SUPREME FIREPLACES INC. shall not be responsible for any labor costs for the replacement or repair of any 
electrical components, painted/plated parts, secondary air burning system, and the combustion air control.  

The  following  parts  are  guaranteed  for  1  year:  blowers,  painted/plated  parts,  secondary  air  burning  system, 
soapstone, and door gasket.  

The following parts are guaranteed for 90 days: ceramic glass (

thermal breakage ONLY

). 

This  warranty  applies  to  normal  residential  use  only.  Damages  caused  by  acts  nature  or  natural  disasters, 
accidents,  over  firing,  misuse,  abuse,  negligence,  improper  installation,  alterations  or  substitutions  of 
components  of  the  fireplace  insert,  abrasives,  chemical  cleaners,  and  negligence  are  not  covered  by  this 
warranty. Burning anything other than natural wood will damage your fireplace and void the warranty. 

SUPREME FIREPLACES INC. will not be responsible for environmental conditions such as inadequate vents 
or ventilation, excessive venting configurations or negative air pressures which may or may not be caused by 
mechanical systems such as exhaust fans, furnaces, clothes dryers, etc. 

Summary of Contents for FUSION 18


























Reviews: