SUPREME 38SF, Owner'S Manual, Page: 40 / 45

37
Table 7-1: Parts List of Door Assembly
Figure7-1: Door Assembly Exploded View
f)
Place the new ¾” gasket around the door framing and cut any excess gasket with scissors. NOTE: It is
recommended to tape the extremity of the gasket for a cleaner result.
Give significant amount of time to allow the silicone to cure before reinstalling the door onto the firebox. A slight
resistance is expected when closing the door with the new ¾” gasket; the door will close normally after the
gasket has taken proper shape.
7.6 Replacing the Glass Panel
SUPREME FIREPLACES INC. uses a high quality 5mm
thick Pyroceram III / Keralite ceramic glass that can
withstand temperatures up to 1300
o
F. It is recommended
to perform a weekly visual check for any damages or
cracks on the glass.
WARNING: Avoid striking the glass and slamming the
door shut. Never operate the unit with a broken or
damage glass.
CAUTION: Wear protective gloves when handling
broken glass.
Refer to the following instructions for
replacing the glass:
a) Order the replacement kit for the Elegance 42 glass.
b) Remove, clean, and dispose any broken glass from
the door and the surroundings.
c) Remove the door from the firebox and place it face
down on a soft surface. NOTE: Rotate the handle to
permit proper placing.
d) Using a wedging tool or flat head screwdriver, gently
remove the ¾” gasket (along with the silicone) from
the door framing.
e) Using a wrench, remove the 8 nuts fastened around
the door framing.
f) Remove the first row of metal brackets (2 small and 2
big) and thin gasket.
g) Remove the damage glass and clean thoroughly the
door framing from loose glass fragments.
h) Place the new glass onto the second row of thin
gasket, centered with the door framing.
i) Place back the first row of metal brackets (2 small and 2 big) and thin gasket.
j) Using a wrench, fasten the 8 nuts around the door framing (do not over-tighten).
k) Apply a bead of high temperature silicone along the groove of the metal brackets.
l) Plac
e the ¾” gasket back into position.
Give significant amount of time to allow the silicone to cure before reinstalling the door onto the firebox.
Item Code Description Qty
1 DR2100-* Door frame assembly 1
2 DR_25.75 Horizontal metallic bracket 4
2 DR_18.125 Vertical metallic bracket 4
3 PYRO_24.25X17 Pyroceram glass 1
4 GSK_31_7 Thin gasket 2
5 GSK_75_7 Thick gasket 1
6 SF0031 Door latch - Elegance 1
7 SF0032-01 Wood pull handle
– Elegance
1