4. Smart/Silence mode selection:
1. Smart mode as default will be activated when heat pump is on, and screen shows .
2. Press to enter Silence Mode, and screen shows .
(Suggestion: select Smart mode for initial heating)
5. Defrosting
a)
Auto Defrosting: When heat pump is defrosting, will be flashing. After defrosting,
will stop flashing.
b)
Compulsory Defrosting: When heat pump is heating, press and together for
5 seconds to start compulsory defrosting, and will be flashing. After defrosting,
will stop flashing.
(Note: Compulsory defrosting intervals should be more than 30 minutes and the
compressor should run for more than 10 minutes.)
6. Wifi setting
Please refer to page 27.
Heatseeker VortexPro (R32) Inverter Heat Pump
Installation & User Manual
08
