12
Cont.
1.4.3 Configuring Secure I/O
This connects BioLite Solo to Secure I/O.
1.
Connect wires between BioLite Solo, Secure I/O, and respective switches as shown
below.
※
See “5.4.6 Installing the bracket.”
2.
Configure the relay settings as shown below. (Based on the figure above)
Use
▶
/
◀
buttons to
select
SIO Relay 0
and
press
OK
.
Use
▶
/
◀
buttons to select
SIO Relay 0
and press
OK
.
(*Not Use/ SIO Input 0/ SIO
Input 1)
Relay
SIO Relay 0
Door
Exit Button
SIO Input 0
SIO Relay 0
Use
▶
/
◀
buttons to
select
N.O
and press
OK
.
Type
N.O
Exit Button
Device
In/Out
Use
▶
/
◀
buttons to
select the
In/Out
icon and
press
OK
.
Press
Menu
-> Enter ID ->
Enter password ->Use
▶
/
◀
buttons to select the
Device
icon and press
OK
.
Item
Door
In/Out
Use
▶
/
◀
buttons to
select
Door
and press
OK
.
For actual wiring, see “5.4 System
Installation.”
Sync button
should be pressed after complete the relay setting.