SUPPORTPLUS SP-MP3D-256, User Instruction Manual

Page: 23 / 94

Voice Recording Function
1. After turning on the power by pressing PLAY/STOP button, press the
Mode switch (in the middle of the rolling wheel), and then you can see
the menu as illustration.
2. Now you can select the files to be played by the Mode Switch button.
Press the PLAY/STOP button to listen to the recorded files (see the
following illustration) If there are no recorded files, the interface would
show “No voice”
3. Then press Mode Switch (in the middle of rolling wheel), you will see the
function menu with the Voice Recording mode . Select Recording menu
and press Mode Switch to start voice recording. The Recording
interface is showed as the following right figure.
4. You could stop recording by pressing PLAY/STOP button momentarily
and exit from Voice Recording mode and switch to MP3 function by
select Function menu.
Note: While recording all buttons except PLAY/STOP or Hold button are not
workable.