Chapter 10 Setting
www.supmea.com
16
1.
Choose the mode for measuring, press UP/DOWN key to choose, press
ENTER to next.
2.
The Range selection for EC only.
3.
Offset , range for EC is ±1.00uS/ ±10.0uS/ ±100uS/ ±1.00mS/ ±10.0mS/
±100mS,for Resistivity is ±1.00MΩ,for Salinity is ±1.00g/Kg, for TDS is
±100ppm
4.
Filter: Range 0-10.
5.
Note : If the reading is not stable then user can set the filter to average the
readings.
10.8 Temperature settings
Automatic/manual temperature compensation selection, press UP/DOWN key
to choose.
1.
Temperature compensation setting, press UP/DOWN key to choose.
2.
Temperature probe, press UP/DOWN key to choose.
3.
Temperature offset ,the range is±5.00
℃
.
4.
Temperature for measuring when user set the temperature to manual.
5.
Temperature for calibration mode when user sets the temperature to
manual.
6.
Temperature display: display the temperature on measurement mode or
not
Note:
1.
When user chooses AUTO and doesn’t connect temperature probe then
the display will not correct.
2.
When select the probe needs to make sure the probe type is correct.
