Chapter 3 Signal Output
www.supmea.com
-9-
Chapter 3 Signal output
The signal calibrator can source voltage, active current,
passive current, thermocouple signal, and PT100 signal.
* Note: PT100 signal is available only for SUP-C703S
3.1 Voltage and Active Current
Connect the black signal cable to the public end and
the yellow signal cable to the output end.
Press the yellow signal button
to switch the
signal type.
Press
or
to adjust the output value.
Press the yellow source button
, and the value of
on the LCD will turn from
to
and the output is started.
3.2 4-20 mA
The 4-20 mA signal increases/decreases by 4 mA each time.
Select 4-20 mA to be the signal type.
Use the corresponding
button of 4-20 mA to
set the output value in a stepping manner, with an
increase/decrease of 4 mA each time in the order of
4→8→12→16→20. You can also use the regular
Summary of Contents for SUP-C703S
Page 11: ......
