SUPMEA SUP-C703S, User Manual

Page: 19 / 36

Chapter 2 Component Names and Functions
- www.supmea.com -8-
2.3 LCD display

A Measurement value display: four digits with a unit
 B. Source signal value: four digits with a unit
 20mV/100mV/4-20mA/K/E/J/T/R/B/S/N
。
 C. Signal and cold conjunction compensation mode:
 20mV/100mV/4-20mA/K/E/J/T/R/B/S/N
 RJA is the automatic cold end and M is manual.

D. Programming function:
 n/m is split output. The output value = (main set value)
x (n/m)
 “SWEEP” is linear output that outputs signals in a
linear manner based on the time you set.
 “STEP” is stepping output that outputs signals in a
stepping manner based on the time you set.
 “TIME” is the output time for each step, configurable
from 0 to 999 s.
 “COUNT” is the number of output cycle, configurable
from 0 t0 999. 0 means an infinite loop.
 E. Unit: mA/mV/V/°C

F. Range switch function: RL is the lower limit of the
display range, while RH is the upper limit. SL is the
lower limit of the signal, while SH is the upper limit.
 G. Battery level: the real-time battery level is
displayed. Three bars are the full level.