Chapter 2 Component Names and Functions
www.supmea.com
-7-
⑦
Turn on or off the power.
⑧
Turn on or off the signal output.
⑨
Switch
(OFF by
default)
1. Automatic power-off: the device will
automatically be turned off if there is no operation
for 10 minutes.
2. Manual cold conjunction compensation: set
cold conjunction compensation value manually
for thermocouple measurement.
3. Passive output: output passive current signals
for analog transmitters.
4. Low-load mode: during passive current input,
output 16 V voltage to the transmitter to lower the
power dissipation and prolong the service life.
⑩
Switch the type of measurement/output signals.
Switch the measurement/output range.
Turn on the programming function.
Switch the programmable output wave form
(linear output/stepping output))
Increase or decrease the value.
Summary of Contents for SUP-C703S
Page 11: ......