Superwinch Certus Wireless, Owner'S Manual

Page: 9 / 18

9
MAINTENANCE
Depending on use, the batteries in the remote transmitter will need
replacement after a period of time.
No other regular maintenance is required.
Receiver shows no
reaction after supply
current has been
connected and Green
LED does not light up
when power button
on transmitter is pressed
Receiver shows no
reaction after current
is supplied and button
on transmitter is pressed
Green LED is on but Red
LED does not light up
when Green button 1 or
2 is pressed
Receiver can be taken
out of standby mode
but quickly shuts down
again
System does not have
enough effective range
Supply current not
available /
Connections reversed
Transmitter not
programed correctly to
receiver
Another source is
transmitting on the same
frequency
Receiver mounted
incorrectly /
Receiver surrounded in
metal /
Weak battery
TROUBLESHOOTING
Check polarity /
Test current
into receiver /
Turn on main
power.
Re-program transmitter
(see page 4-5)
Deactivate other
transmitter
See Mounting instructions
Change battery
Problem Possible Cause Solution
SPANISH
System does not operate
in the proper direction
Harness wired
incorrectly
Verify connections per
installation instructions