Install windshield, exterior mirrors & steering wheel:
Align the tabs on the
bottom of the windshield with the slots in the body of the car in the normal position of
the windshield. Press down firmly to snap the windshield into place. Put mirrors into
place on the body. Press down firmly until a clicking sound is heard, (letting you know
they have snapped into place). Connect the 2 electrical connectors between the steering
wheel and the wires from the car. Slide steering wheel onto the steering shaft. Align the
screw hole in the steering shaft and the steering wheel and slide the bolt through the
hole. Apply the nut to the end of the bolt and tighten until snug.
Connecting the Battery & Installing the Seat:
Slide red wire with spade
terminal onto the red or positive (+) side of the battery. Slide the black wire with spade
terminal onto the black or negative (-) side of the battery. DO NOT INSERT THE RED WIRE
ONTO THE BLACK OR NEGATIVE SIDE OF THE BATTERY! Connect the plastic connector
from the battery to the corresponding plastic connector from the control box of the car.
Once all connections are made, align the tabs on the back of the seat with the slots in the
body of the car. Once seat is in place, flip up the seat lock located under front of seat and
slide to the side to lock the seat into place.
Steering Wheel Functions:
