ASSEMBLY INSTRUCTIONS:
Install front & rear wheels:
Remove car from box. Remove the car from the
plastic bag. Turn car upside down. Remove the plastic axle protection covers from the
end of each axle including the longer plastic sleeve and discard.
Apply thin coat of
lubricating grease (supplied) evenly over
approximately 4” of
each end of all 4 axles. Slide
one tire on the rear axle at each end with the hub of the tire closest to the body of the
car. While sliding on the tire, press the center of the wheel and line up the hub with the
corresponding sleeve on the gearbox. Once the tire is slid completely on the axle, release
the center button of the wheel to lock the wheel into place. Install a washer on each
front axle. Slide one tire on each front axle with the hub of the tire closest to the body of
the car. While sliding on the tire, press the center of the wheel. Once the tire is slid
completely on the axle, release the center button of the wheel to lock the wheel into
place.
