12.
Install Seat:
Before placing the seat, connect the electrical plug from the battery to the
corresponding plug from the wiring to the car. Once connection is made, place the
seat over the battery area front first and re-apply screw to secure.
13.
Charging Port:
The charging port is located just below the handlebars. Lift charging port cover and
plug in charger. Once charger is connected to the car, plug into wall outlet.
BATTERY MUST BE CHARGED FOR A MINIMUM OF 12 HOURS BEFORE INITIAL USE
TO AVOID DAMAGE TO THE BATTERY.
14.
Once battery is fully charged, disconnect from charger. Depress power button to turn on
the car. Once power is on, all lights light up, accompanied by the sound of the engine. To
allow child to operate the car, remote control/manual switch has to be set to the manual
position. To move the car forward, forward/reverse switch has to be set to the forward
position and to move the car backward, the switch will need to be set to the reverse
position. To operate the car using the remote control, remote control/manual switch has
to be set to the remote control position.
The buttons found on the handlebars are for the horn and the on board music. There is a
MP3 interface located on the dash area with a volume knob to control the level of sound.
