8.
Install the handlebars:
Connect electrical connection from the handlebars to the corresponding connector
on the car. Remove the nut and bolt from the steering shaft. Place the handlebar
over the shaft and line up the hole in the handlebar to the hole in the steering shaft
and install the bolt through the hole and tighten the nut onto the bolt to secure.
9.
Install Windshield:
Place the windshield in the direction of the arrow in to the corresponding slots and
press into place.
10.
Install rearview mirrors:
Place mirrors in the direction of the arrows into the corresponding holes and press
into place.
11.
Install the trunk:
Remove the screw that is located at the rear of the seat. Place trunk onto the area
behind the seat and secure with small screws. (Included)
