12
Cleaning Your EXP 42” Plus Laminator
The laminator may be cleaned with a lint free cloth, lightly dampened with a mild soap and water
solution. Do not use spray-on cleaners. Do not immerse any part of the laminator in water or any
other liquid.
Cleaning the rollers with Poly-Off Cleaners & Erasure
1. Remove the Poly-Off kit from its
packaging.
2. Place the latex gloves over your hands
for protection.
3. Pour the required amount of Poly-Off on
a sponge and/or abrasive brush.
4. Scrub the affected area until all debris
has loosened.
5. Wipe clean with a towel or cloth.
6. Place the Poly-Off kit back in its
packaging for storage.
Note: The poly-off cleaning kit is not standard with the laminator. Order part # 221065
Specifications
Capacity ...................................... 41”
Height.......................................... 19
¼
”
Width ........................................... 57”
Length ......................................... 27
½
”
Net Weight .................................. 205 lbs.
Shipping Weight......................... 255 lbs.
Electrical ..................................... 230v 30A Single Phase
Laminator.com
www.laminator.com