Supero X9SRD-F, User Manual

Page: 17 / 95

Chapter 1: Introduction
1-5
Jumper Description Default Setting
JPB1 BMC Enable/Disable
Pins 1-2 (Enabled)
JPG1 Onboard VGA Enable/Disable Pins 1-2 (Enabled)
JWD1 Watch Dog Timer RST/NMI Selection Pins 1-2 (Reset)
JPME1 ME Recovery Mode Select Pins 2-3 (Disabled)
JPME2 ME Manufacture Mode Pins 2-3 (Disabled)
JPWP1 BIOS Write Protect Pins 1-2 (Enabled)
JPEW1 PCI-E Vaux Select Pins 1-2 (Normal, 3.3V Power Plane)
JBT1 CMOS Clear (See Chapter 2)
JI2C1, JI2C2 SMB to PCI Slots (See Chapter 2)
Connectors/LED Description
MICRO LP SLOT PCI-E (Micro LP Slot)
SPKR1 Internal Speaker / Buzzer
JTPM1
Trusted Platform Module (TPM) Header
JUSB2 USB Header (USB 2/3)
I-SATA4 / I-SATA5 Internal SATA Ports
JSD1 SATA Disk On Module (DOM) Power Connector
T-SGPIO2 Serial Link General Purpose Header
DIMMA1~DIMMD1 DIMM Memory Slots
IF + PWR Back Panel Edge Connector (SATA/Power)
CPU LGA 2011 Socket for a single Xeon E5-2600/E5-1600 series CPU
BATT Onboard Battery
SLOT1 PCI-E 3.0 x 8 Slot
LED4 IPMI Heartbeat (Green: Blinking = Normal)
LED5 Fail LED
JKVM1 USB / VGA / UART Interface
IPMI RJ45 IPMI Port
LED6 Unit ID LED
UID BUTTON Unit ID Button
PWR BTN/LED Power Button and LED
Ports and Connectors
Jumper Descriptions