Supero X9SPU-F, User Manual

Page: 40 / 107

2-14
X9SPU-F Motherboard User’s Manual
Ethernet Ports (LAN1/LAN2)
Two Ethernet ports (LAN1/LAN2) are
located next to the VGA port on the
I/O backpanel. These ports provide
networking connectivity with speeds
up to 1Gb/s. Please see the table on
the left for the pin definitions.
LAN/IPMI Ports
Pin Definition
Pin# Definition
1 TD0- 10 SGND
2 TD0+ 11 P3V3SB
3 TD1- 12 Act LED
4 TD1+ 13 Link 100 LED
(Green, +3V3SB)
5 TD2- 14 Link 1000 LED
(Yellow, +3V3SB)
6 TD2+ 15 Ground
7 TD3- 16 Ground
8 TD3+ 17 Ground
9 P2V5SB 18 Ground
(NC: No Connection)
1. IPMI Port
2. LAN1
3. LAN2
4. Unit ID Switch
5. Rear Unit ID LED (Blue)
IPMI Port (IPMI)
In addition to the two Ethernet ports
(LAN1/LAN2) this motherboard also
features an IPMI port. This provides
remote system management ac-
cess through a standard IP protocol
network.
1
2 3
4
Unit Identifier Switch (UID)
The Unit ID Switch is located on
the I/O backpanel. When the Unit ID
Switch is turned on, both the blue rear
Unit ID LED and front panel Unit LED
on JF1 (if attached to the front Unit
ID LED on the chassis) will activate.
Push the Unit ID Switch again to turn
off both Indicators. These Unit ID LED
Indicators provide easy identification
of the system unit, when installed in a
server cabinet for instance. See also
Unit ID LED later this chapter.
5