Supero X9DRG-HF+, User Manual

Page: 16 / 111

1-8
X9DRG-HF+/X9DRG-HTF+ Motherboard User’s Manual
BIOS
•
128 Mb SPI AMI BIOS
®
SM Flash BIOS
•
APM 1.2, PCI 2.3, ACPI 1.0/2.0/3.0, USB Keyboard,
Plug & Play (PnP) and SMBIOS 2.5
Power
•
ACPI/ACPM Power Management
Management
•
Main switch override mechanism
•
Keyboard Wake-up from Soft-Off
•
Power-on mode for AC power recovery
•
Intel
®
Intelligent Power Node Manager (Available
when the supporting firmware and the power supply
cable are installed on the motherboard.)
•
Management Engine
PC Health
CPU Monitoring
Monitoring
•
Onboard voltage monitors for CPU Core, Memory
Power, +3.3V, 3.3VSB, +5V, +5V Dual, +12V, HT,
Chipset, and Battery Voltages.
•
CPU Thermal Design Power (TDP): support up to
135W (See Note 1 below.)
•
CPU 5+1 -Phase switching voltage regulator
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Thermal Monitor 2 (TM2) support
Fan Control
•
Fan status monitoring with firmware thermal man -
agement via IPMI interface
•
Low noise fan speed control
System
Management
•
PECI (Platform Environment Configuration Interface)
2.0 support
•
System resource alert via SuperDoctor® III
•
SuperoDoctor® III, Watch Dog, NMI
•
Chassis Intrusion Header and Detection
Dimensions
•
19.80" (L) x 10.90" (W) (502.92 mm x 276.86 mm)
Note 1 : CPU Maximum Thermal Design Power (TDP) is subject to chassis
and heatsink cooling restrictions. For proper thermal management, please
check the chassis and heatsink specifications for proper CPU TDP sizing.
Note 2 : For IPMI Configuration Instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.