4-18
X9DRFR Motherboard User’s Manual
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are
Onboard
, and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and
Disabled
.
Super IO Configuration
Super IO Chip:
This item displays the Super IO chip used in the motherboard.
COM Configuration
Serial Port
Select Enabled to enable the COM serial port. The options are
Enabled
and Dis-
abled.
Device Settings
This item displays the settings of the COM serial port.
Change Settings
This option specifies the base I/O port address and the Interrupt Request address
of the COM serial port. Select
Disabled to prevent the serial port from accessing
any system resources. When this option is set to Disabled, the serial port becomes
unavailable. The options are
Auto
, IO=3F8h; IRQ=4; IO=3F8h; IRQ=3; IO=2F8h;
IRQ=3; IO=3E8h; IRQ=5; IO=2E8h; IRQ=7; IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11,
12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
Device Mode
Use this feature to select the desired mode for a serial port specified. The options
are
Normal
and High Speed.
SOL Configuration
Serial Port
Select Enabled to enable the SOL serial port. The options are
Enabled
and Dis-
abled.
