Supero X7DWN+, User Manual

Page: 26 / 93

2-4
X7DWN+ User's Manual
Installation of the Heatsink
CEK Passive Heatsink
Screw#1 Screw#2
Screw#1
1. Do not apply any thermal grease to the
heatsink or the CPU die because the re-
quired amount has already been applied.
2. Place the heatsink on top of the CPU so
that the four mounting holes are aligned
with those on the retention mechanism.
3. Screw in two diagonal screws (ie the #1
and the #2 screws) until just snug (-do not
fully tighten the screws to avoid possible
damage to the CPU.)
4. Finish the installation by fully tightening
all four screws.
CEK Heatsink Installation
Screw#2
Warning: We do not recommend
that the CPU or the heatsink be
removed. However, if you do need
to uninstall the heatsink, please
follow the instructions below to
uninstall the heatsink to prevent
damage done to the CPU or the
CPU socket.
To Un-install the Heatsink
!