Supero X10SAT, User Manual

Page: 60 / 117

2-36
X10SAT User’s Manual
A
B
Intel Recovery Mode (JPME1)
Use Jumper JPME1 to select ME frmware
Recovery mode, which will limit resource
allocation for essential systemoperation
only in order to maintain normal power
operation and management. In the single
operation mode, online upgrade will be
available via Recovery mode. See the
table on the right for jumper settings.
Intel Manufacturing Mode (JPME2)
Close pins 2 and 3 of Jumper JPME2 to
bypass SPI flash security and force the
system to operate in the Manufacturing
Mode, allowing the user to flash the sys -
tem firmware from a host server for sys -
tem setting modifications. See the table
on the right for jumper settings.
Intel Recovery Mode
(JPME1)
Jumper Settings
Pin# Definition
1-2 Normal (Default)
2-3 ME Recovery
Intel Manufacturing Mode
(JPME2)
Jumper Settings
Pin# Definition
1-2 Normal (Default)
2-3 Manufacture Mode
A. Intel Recovery Mode
B. Intel Manufacturing Mode