Chapter 4: AMI BIOS
4-23
PCI Device Option ROM Setting
CPU1 JMEZ1 AOM PCI-E x8 (Option ROM)
Select Enabled to enable Option ROM support to boot the computer using a de-
vice installed on the slot specified by the user. The options are Disabled,
Legacy
and EFI.
Onboard Video OPROM (Option ROM)
Select Enabled to enable Option ROM support to boot the computer using a
device installed on the slot specified by the user. The options are Do Not Launch,
Legacy
and EFI.
VGA Priority
Use this item to select the graphics device to be used as the primary video display
for system boot. The options are
Onboard
and Offboard.
Onboard LAN Option ROM Type
Select Legacy to boot the computer using a Legacy device installed on the moth-
erboard. The options are
Legacy
and EFI.
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM
Use this option to select the type of device installed in LAN Port1, LAN Port2 or
the onboard video device used for system boot. The default setting for LAN1 Option
ROM is
PXE
, for LAN2 Option ROM is
Disabled
.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-
fied Extensible Firmware Interface) for network stack support. The options are
Enabled and
Disabled
.
Super IO Configuration
Super IO Chip AST2400
Serial Port 1 Configuration/Serial Port 2 Configuration
Serial Port
Select Enabled to enable the onboard serial port specified by the user. The options
are
Enabled
and Disabled.
Device Settings
This item displays the base I/O port address and the Interrupt Request address of
a serial port specified by the user.
