Chapter 1: Overview
1-5
X10DDW-i/iN Jumpers
Jumper
Description
Default Setting
JBT1
Clear CMOS
See Chapter 2
JI
2
C1/JI
2
C2 SMB to PCI-E Slots
Pins 2-3 (Disabled)
JPB1
BMC Enable
Pins 1-2 (Enabled)
JPG1
VGA Enable
Pins 1-2 (Enabled)
JPLAN1
GLAN1/GLAN2 Enable
Pins 1-2 (Enabled)
JPME2
Manufacture (ME) Mode Select
Pins 1-2 (Normal)
JWD1
Watch Dog Timer Enable
Pins 1-2 (Reset)
X10DDW-i/iN Connectors
Connectors
Description
Battery (BT1)
Onboard CMOS battery (See Chpt. 3 for Used Battery
Disposal)
COM1
COM header
Fan1-8
System cooling fan headers (1-8)
J24
24-pin ATX main power connector (See Warning on
Page. 1-6.)
JD1
Speaker/Power LED
JF1
Front Panel Control header
JIPMB1
4-pin External BMC I
2
C header
JL1
Chassis Intrusion header
JPI
2
C1
Power Supply SMBbus I
2
C header
JPWR1/2
12V 8-Pin power connectors (See Warning on Pg. 1-6.)
JMEZ1
SMCI-proprietary PCI-E 3.0 x8 Mezzanine slot w/SAS
support (See the note on Page 1-6.)
JSTBY1
Standby Power connector
JTPM1
TPM (Trusted Platform Module)/Port 80 header
LAN1/LAN2
G-bit Ethernet (GLAN) Port 1/Port 2
(IPMI) LAN
IPMI_Dedicated LAN support by the Aspeed controller
P1_NVME0/1
(X10DDW-iN Only)
NVM Express PCI-Express 3.0 x4 ports 0/1 (from CPU1) )
P2_NVME0/1
(X10DDW-iN Only)
NVM Express PCI-Express 3.0 x4 Ports 0/1 (from CPU2)
I-SATA 0-3 (JS1)
Intel SATA 3.0 connectors 0-3
I-SATA 4/5
Intel SATA 3.0 connections 4/5 w/SuperDOMs supported
S-SATA 0-3 (JS2)
SATA 3.0 connectors 0-3
I-SGPIO2
(SATA-SGPIO1)
Serial_Link General Purpose I/O Header 2 for SATA con-
nections
SP1
Internal Speaker/Buzzer
