Supero SUPERSERVER 8017R-7FT+, User Manual

Page: 22 / 104

3-2
S
UPER
S
ERVER 8017R-TF+/8017R-7FT+ User's Manual
2
1
NIC2
Indicates network activity on GLAN2 when fl ashing .
3-3 Control Panel LEDs
The control panel located on the front of the SC818A-1K43LPB chassis has fi ve
LEDs. These LEDs provide you with critical information related to different parts of
the system. This section explains what each LED indicates when illuminated and
any corrective action you may need to take.
Overheat/Fan Fail
When this LED fl ashes it indicates a fan failure. When on continuously (on and not
fl ashing) it indicates an overheat condition, which may be caused by cables ob-
structing the airfl ow in the system or the ambient room temperature being too warm.
Check the routing of the cables and make sure all fans are present and operating
normally. You should also check to make sure that the chassis covers are installed.
Finally, verify that the heatsinks are installed properly (see Chapter 5). This LED
will remain fl ashing or on as long as the overheat condition exists.
NIC1
Indicates network activity on GLAN1 when fl ashing .
HDD
On the 8017R-TF+/8017R-7FT+ this light indicates SATA and/or DVD-ROM drive
activity when fl ashing.