Supero SUPERSERVER 8017R-7FT+, User Manual

Page: 42 / 104

5-14
S
UPER
S
ERVER 8017R-TF+/8017R-7FT+ User's Manual
Reset Button
Pins 3 and 4 of JF1 attaches to the
reset button on the computer chas-
sis. See the table on the right for pin
defi nitions.
Power Button
The power button connection is
located on pins 1 and 2 of JF1. Mo-
mentarily contacting both pins will
power on/off the system. This button
can also be confi gured to function as
a suspend button (with a setting in the
BIOS). To turn off the power when the
system is set to suspend mode, press
the button for at least 4 seconds.
Refer to the table on the right for pin
defi nitions.
5-8 Connector Defi nitions
Required Connection
+12V 8-pin Power
Pin Defi nitions
Pins Defi nition
1 - 4 Ground
5 - 8 +12V
ATX Power 24-pin Connector
Pin Defi nitions
Pin# Defi nition Pin # Defi nition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Reset Button
Pin Defi nitions (JF1)
Pin# Defi nition
3 Reset
4 Ground
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 PW_ON
2 Ground
Processor Power Connector
JPW2, JPW3, JPW4 and JPW5 pro-
vide power for the processors. All four
should be connected to your power
supply. See the table on the right for
pin defi nitions.
Main ATX Power Supply
Connector
A 2 4 - p i n m a i n p o w e r s u p p l y
connector(JPW1) and four 8-pin CPU
PWR connectors (JPW2/3/4/5) are
located on the motherboard. These
power connectors meet the SSI EPS
12V specification. You must also
connect the 8-pin processor power
connectors to your power supply (see
below).